This article provides the recommended steps for troubleshooting a “PLC communication down” error. Ⓘ NOTICE Only qualified personnel familiar with the construction and operation of this equipment and the hazards involved should install, adjust, ...
This article lists the steps on how to remove and replace the 3rd Crossfold Drivebelt (# 10003.0) from a 3 crossfold AT230 folder. This belt is located within the crossfold section of the machine. The image below is viewed from laying down underneath ...
Use the link below for a demonstration of how to adjust the speed of the stacker doors using the airflow valves. Ⓘ NOTICE Only qualified personnel familiar with the construction and operation of this equipment and the hazards involved should ...
Use the link below for the steps to adjusting the primary fold belt on a FlexFold. Ⓘ NOTICE Only qualified personnel familiar with the construction and operation of this equipment and the hazards involved should install, adjust, operate, and/or ...
Use the link below to find the recommended steps for troubleshooting the proximity sensors. Ⓘ NOTICE Only qualified personnel familiar with the construction and operation of this equipment and the hazards involved should install, adjust, operate, ...