How to clean skis

How to clean skis

Use the link below for a short video detailing how to clean the skis on a FlexFold. 


 Ⓘ NOTICE  Only qualified personnel familiar with the construction and operation of this equipment and the hazards involved should install, adjust, operate, and/or service this machine. Read and understand the manual in its entirety before proceeding. Failure to observe this precaution could result in severe bodily injury or loss of life. By proceeding, you are indicating that you acknowledge and agree that Foltex USA is not responsible for any damage to property or persons while accessing and/or using this service.


🔧 Tools you may need:    𐄂 6mm hex key    𐄂 abrasive pad    𐄂 degreaser    𐄂 towel

​Click this link for a step by step instructional video.


    • Related Articles

    • How to install Teflon tape on skis

      Use the link below for the recommended steps to installing Teflon tape to the bottom of skis.   Ⓘ NOTICE  Only qualified personnel familiar with the construction and operation of this equipment and the hazards involved should install, adjust, ...

    • Information on FlexFold Drywork Stacker Door Bearings (10378.0)

      FlexFold Drywork stacker doors use flange bearings (part #10378.0) made of a hardened steel core encased in a sacrificial aluminum housing. This design is meant to protect more expensive components if doors misalign. Stronger Isn't Better A stronger ...

    • How to troubleshoot a “primary fold too long detected” or “sensor crossfold too long detected" error message

      This article covers the recommended steps to troubleshooting for the error message “primary fold too long detected” or “sensor crossfold too long detected.”  ? Tools you may need:  ☐ Set of metric Allen wrenches  Ⓘ NOTICE  Only qualified personnel ...

    • How to adjust the retracting conveyors

      Use the link below for the steps to adjusting the speed of the retracting conveyors on a FlexFold. ⛔ This article excludes models without a sorting conveyor.   Ⓘ NOTICE  Only qualified personnel familiar with the construction and operation of this ...

    • How to adjust a primary fold belt

      Use the link below for the steps to adjusting the primary fold belt on a FlexFold. Ⓘ NOTICE Only qualified personnel familiar with the construction and operation of this equipment and the hazards involved should install, adjust, operate, and/or ...